The original launch of the ParaEq MKII and ParaEq MKII Deluxe was one of the biggest in the history of Empress Effects, so we wanted to do something special to celebrate its success.
Empress is excited to release this limited run colourway in sleek black sparkle finish. Only 500 have been made.
Along with the white-on-black graphics, the pedal offers all the features that made the ParaEq MKII Deluxe our top-selling pedal of 2023, with 3 parametric EQ bands, 4 additional filters, 30dB of footswitchable boost, 27V internal operation for pristine headroom, and your choice of true or buffered bypass.
Grab a ParaEq MKII Deluxe in this exclusive finish before they’re all gone, and enjoy this exclusive version of what might be the most powerful tone shaping pedal on the planet.
Powerful Parametric EQ
The pedal features 3 parametric bands, each with up to 15dB of boost and cut and fully variable bandwidth. The lower knobs control high-pass, low-pass, and low- and high-shelf Baxandall filters. It’s the perfect tool whether you need wide, smooth curves or tight surgical precision. The pedal also operates internally at 27V, close to rackmount studio gear, for enough clean headroom to handle even the most aggressive frequency boosts.
Footswitchable Boost
Kick in up to 30dB of gain to help a solo cut through the mix, or to push your preamp into overdrive. You can set the boost to only process signal while the EQ is active, or to function fully independently - almost like having a separate EQ and boost pedal on your board.
True or Buffered Bypass
The ParaEq MKII Deluxe offers both true bypass for maximum transparency, and buffered bypass to protect against signal loss over long cable runs.I
Key Features
- Limited-edition black sparkle finish
- 3 parametric EQ bands with 15dB of boost/cut
- Variable bandwidth per band
- High-pass, low shelf, high shelf, and low-pass filters
- Footswitchable boost with up to 30dB of gain
- Linked or independent operation of EQ & boost
- 27V internal operation for high clean headroom
- True or buffered bypass
- Input Voltage 9V DC Centre-Negative
- Required Current 300mA
- Power Input Connector 2.1mm Barrel Connector
- Height (Enclosure Only) 1.5”
- Height (Including Controls) 2.5”
- Length 4.8”
- Width 2.6”