AC10

AC10

Regular price
$296.00
Sale price
$296.00
Regular price
Sold out
Unit price
per 


AC10 is part of our linear range of dedicated multi-output power supplies for effect pedals. AC10 features two powerful AC sections with 800mA and each offers voltages 9, 12 and 16V AC. If you have one or two pedals in your setup which requires an AC power source, AC10 is the right choice. It powers all tube pedals from Electro-Harmonix, Kingsley, older Blackstar HT series, the Whammy or JamMan from DigiTech, Tube Rotosphere, Tubeman, Tube Factor or Replex from Hughes & Kettner or EBS Valve Drive just to mention a few. If you only have one AC pedal you can convert one of the AC sections into a powerful DC section offering 600mA with voltages 9, 12 and 15V DC. The first 4 isolated outlets offering 600mA are perfect for pedals using 9 or 12V DC at lower currents op to 200mA.


Features

    10 outlets configured in 6 isolated sections
    Toroidal transformer with additional electromagnetic field shielding
    2 powerful AC sections with 800mA each
    9, 12 and 16V AC available
    One AC section convertible into a 600mA DC section
    15V option for Radial Tonebone pedals
    Short circuit protection of all outlets
    Advanced LED monitoring of each section
    120 or 230V mains voltage operation
    Total of 16 Flex cables in total included
    Split Flex for powering two pedals of one outlet included
    Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
    Flex cable for Electro-Harmonix vacuum tube pedals included
    Compatible with Pedaltrain and Temple Audio pedalboards
    Mounting bracket and all pedalboard mounting hardware included


Specifications

    Outlet 1-2: 9V DC / 100mA each
    Outlet 3-4: 9 or 12V DC / 200mA each
    Outlet 5-6: 9 and 12 or 15V DC / 600mA*
    Outlet 7-8: 9 or 12V AC / 800mA*
    Outlet 9-10: 9, 12 or 16V AC / 800mA
    * only one of these two sections can be used
    Size: 158x98x35mm (excl. rubber feet)
   


What's in the box

    CIOKS AC10 power supply
    Mains power cord
    17 Flex cables:
    Type 1 – black with 5,5/2,1mm centre negative DC plug x8
    Type 2 – red with 5,5/2,1mm centre positive DC plug x1
    Type 4 – green with 5,5/2,5mm centre positive DC plug x2
    Type 5 – black with 3,5mm tip positive Jack plug x1
    Type 6 – black with 9V battery clip x1
    Type 7 – blue with 2 pin DIN plug x1
    Split Flex type 1 – powers two pedals of a single outlet x1
    Stack Flex type 1 – white/black, adds voltages of two outlets x1
    Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and a hex key
    Manual
    Product sheet (drill guide)
    Flex guide