The Fault Overdrive/Distortion is the drive you didn’t even know you needed. It can push your amp over the edge, provide a sensitive drive for a clean signal, or act as an all out distortion for your chugging rhythms or singing leads or noise experiments. A Bypass switch turns it on and off. Volume makes it louder. Gain 1 sets the intensity of the first gain stage, and can go from light and sparkly to tight and crunchy.
Low, Mid, and High each cut or boost their respective frequencies – scoop it, hump it, flatten it, whatever your heart desires. Low is a 100 Hz shelf filter, Mid is 500 Hz bell, and High is 3 kHz shelf.
Gain 2 is activated by the Gain 2 footswitch – if it’s off, it does nothing. If the knob is all the way down, it does nothing. But turn the switch on and the knob up and you’ll find increasingly heavy distortion in a pedal you thought was only an overdrive.
Created by Old Blood Noise Endeavors. The art on the fault was created by Evan M. Cohen of Beacon, NY.
Manufacturer: Old Blood Noise Endeavors